-
ایک سٹاپ حل
متنوع ترقی پر توجہ مرکوز، ہم بہترین معیار اور مسابقتی قیمت کے ساتھ اپنے گاہکوں کی مختلف ضروریات کو یقینی بنانے کے لئے، زنجیروں فیکٹری، webbing کے گوفن فیکٹری، گھرنی بلاک فیکٹری، لوڈ بائنڈر فیکٹری اور سٹینلیس سٹیل کی مصنوعات کی فیکٹری کے ساتھ اچھے تعلقات قائم. -
20 سال کا تجربہ
ہم بیس سال کے لئے صنعت دھاندلی میں ہیں. ہم موجا بننے، سورسنگ، پیکیجنگ، ویلیو ایڈڈ خدمات کا ایک مثالی مجموعہ ہیں. آپ کی انفرادی ضروریات کے مطابق معیار سرمایہ کاری مؤثر حل فراہم کرنا. -
اعلی معیار کی
"معیار پہلے، کسٹمر اولین"، ہم ہر مصنوعات کی ترسیل معائنہ کے پاس یقینی بنانے کے. ہم مسابقتی قیمت کے ساتھ اعلی معیار فراہم کرنے کے لئے ہر ممکن کوشش کرے. آپ کی حفاظت ہماری تشویش ہے.
ہیں Linyi تھنڈر دھاندلی کمپنی، لمیٹڈ 1998 ء میں قائم کیا گیا تھا، Linyi شہر، شیڈونگ صوبے میں واقع ہے. ہماری فیکٹری ہارڈویئر دھاندلی کی لائن میں مہارت حاصل ہے، ہم جیسے تار رسی کلپس، طوق، turnbuckles کے، ہکس، بجتی ہے، میں Thimbles، آستین اور متنوع ترقی پر اتنا on.Focus مصنوعات کی وسیع رینج، کی فراہمی، ہم اچھے تعلقات قائم زنجیروں فیکٹری، webbing کے گوفن فیکٹری، گھرنی بلاک فیکٹری، لوڈ بائنڈر فیکٹری اور سٹینلیس سٹیل کی مصنوعات فیکٹری، کے ساتھ بہترین معیار اور مسابقتی قیمت کے ساتھ اپنے گاہکوں کی مختلف ضروریات کو یقینی بنانے کے لئے.


-
Use method and precautions of chain and c...20-09-151. Before use, the working load and applicable scope of the chain rigging shall be clearly seen on the label. Overload use is strictly prohibited, and visual inspection of the chain rigging shall be carried out before use. 2. In normal operation, the hoisting Angle is the key affecting the load. The included Angle of the shadow part in the figure should not exceed 120 degrees at most, otherwise it will cause local overload of the chain rigging. 3. It is forbidden to use informal link between ...
-
Requirements for sling construction site20-09-011. The construction site shall be equipped with enough spare slings of various sizes, which shall be hung at the specified place and put back to its original place after use. 2. Safety working load should be marked on the lute head of the sling, and the insertion rope sleeve should not be used. 3. Make a rope sleeve with a rope clip. The size of the rope clip must be in accordance with the size of the wire rope. 4. All spallers (including lifting rope, lifting lugs and sh...