-
ONE-STOP VUTOLI
Ganizirani za chitukuko osiyanasiyana, ife kumanga ubale wabwino ndi unyolo fakitale webbing gulaye fakitale pulley chipika fakitale, katundu binders fakitale ndi mankhwala zosapanga dzimbiri fakitale, kuonetsetsa zosowa zosiyana makasitomala athu ndi wabwino ndi mtengo mpikisano. -
ZAKA 20 ZOCHITIKA
Ife tiri mu ngalawa makampani kwa zaka makumi awiri. Ndife kusakanikirana yabwino kuwonjezera, Chosaka Misika, ma CD, phindu anawonjezera ntchito. Kupereka khalidwe mtengo njira zothandiza ogwirizana ndi mavuto anu payekha. -
wapamwamba KWAMBIRI
"Quality Choyamba, Makasitomala Mkulu", ife kuonetsetsa lililonse mankhwala pochitika yobereka anayendera. Timachita kupereka mwaluso kwambiri ndi mtengo mpikisano. chitetezo chanu ndi nkhawa zathu.
Linyi Thunder ngalawa NKHA., Ltd anakhazikitsidwa mu 1998 ili Linyi City, Province Shandong. fakitale yathu apadera mu mzere wa ngalawa hardware, ife kupereka ranges lonse la mankhwala, monga tatifupi waya chingwe, maunyolo, turnbuckles, mbedza, mphete, thimbles, manja ndi on.Focus pa chitukuko osiyanasiyana, ife kumanga ubwenzi wabwino ndi unyolo fakitale webbing gulaye fakitale pulley chipika fakitale, katundu binders fakitale ndi mankhwala zosapanga dzimbiri fakitale, kuonetsetsa zosowa zosiyana makasitomala athu ndi wabwino ndi mtengo mpikisano.
-
Use method and precautions of chain and c...20-09-151. Before use, the working load and applicable scope of the chain rigging shall be clearly seen on the label. Overload use is strictly prohibited, and visual inspection of the chain rigging shall be carried out before use. 2. In normal operation, the hoisting Angle is the key affecting the load. The included Angle of the shadow part in the figure should not exceed 120 degrees at most, otherwise it will cause local overload of the chain rigging. 3. It is forbidden to use informal link between ...
-
Requirements for sling construction site20-09-011. The construction site shall be equipped with enough spare slings of various sizes, which shall be hung at the specified place and put back to its original place after use. 2. Safety working load should be marked on the lute head of the sling, and the insertion rope sleeve should not be used. 3. Make a rope sleeve with a rope clip. The size of the rope clip must be in accordance with the size of the wire rope. 4. All spallers (including lifting rope, lifting lugs and sh...