-
ONE-STOP SOLUSI
Fokus ing pangembangan macem, kita mbangun hubungan apik karo pabrik rentengan, webbing Slings pabrik, pemblokiran pabrik katrol, mbukak Binders pabrik lan pabrik produk stainless steel, kanggo njamin kabutuhan beda kita klien karo kualitas apik lan competitive price. -
20 YEARS EXPERIENCE
We are ing rigging industri kanggo puluh taun. We are kombinasi becik saka stok, Sourcing, packaging, layanan nilai ditambahaké. Nyediakake biaya kualitas solusi efektif ngarang kabutuhan individu. -
QUALITY unggul
"Quality First, Customer utomo", kita mesthekake saben produk pass pengawasan layang. We gawe gaweyan kanggo nyedhiyani kualitas unggul karo rega competitive. safety punika badhan kita.
Linyi Thunder Rigging CO., Ltd iki diadegaké ing taun 1998, dumunung ing Linyi City, Langkawi District. kita pabrik wis specialized ing baris saka rigging hardware, kita sumber kisaran saka sudhut produk, kayata klip tali kawat, blok, turnbuckles, pancingan, dering, thimbles, lengen klambi lan on.Focus ing pangembangan macem, kita mbangun sesambetan apik karo pabrik rentengan, webbing Slings pabrik, pemblokiran pabrik katrol, mbukak Binders pabrik lan pabrik produk stainless steel, kanggo njamin kabutuhan beda kita klien karo kualitas apik lan competitive price.
-
Use method and precautions of chain and c...20-09-151. Before use, the working load and applicable scope of the chain rigging shall be clearly seen on the label. Overload use is strictly prohibited, and visual inspection of the chain rigging shall be carried out before use. 2. In normal operation, the hoisting Angle is the key affecting the load. The included Angle of the shadow part in the figure should not exceed 120 degrees at most, otherwise it will cause local overload of the chain rigging. 3. It is forbidden to use informal link between ...
-
Requirements for sling construction site20-09-011. The construction site shall be equipped with enough spare slings of various sizes, which shall be hung at the specified place and put back to its original place after use. 2. Safety working load should be marked on the lute head of the sling, and the insertion rope sleeve should not be used. 3. Make a rope sleeve with a rope clip. The size of the rope clip must be in accordance with the size of the wire rope. 4. All spallers (including lifting rope, lifting lugs and sh...